CCTV优选品牌-16年第三国转口贸易综合服务商

转口贸易热线:0769-2868-3803

转口贸易列表

美国对中国320项产品恢复加征25%关税,9月20日生效(附清单)

标签:320项产品恢复加征25%关税,340亿恢复加征25%关税,160亿产品恢复加征25%关税,升宝

9月16日,美贸易代表办公室(USTR)公布了分别针对160亿美元(自2018年8月23日开征、税率25%)中国产品加征关税中的第二批(2020年9月20日)排除清单、340亿美元(自2018年7月6日开征、税率25%)中国产品加征关税中的第七批(2020年9月20日)排除清单加征有效期(2020年9月20日到期)延长公告;

本次160亿美元加征关税第二批(2019年9月20日)排除清单获得延长清单共涉及13个税号17项产品:未获得有效期延长的共涉及46个税号下72项产品;这72项产品9月20日起恢复加征25%关税。


160亿美元加征关税获得延长清单共涉及13个税号17项产品(继续排除至2020年12月31日)

2019年9月20日美国针对160亿美元(第二批)商品豁免清单
合计第十批
继续排除至2020年12月31日商品目录

美国税号 具体排除产品(英文版) 具体排除产品(中文参考版)
3906.90.5000 Acrylic acid-2-acrylamido-2-methylpropanesulfonic acid-acrylic ester (AA/AMPS/HPA) terpolymers, presented in dry form 丙烯酸-2-丙烯酰胺基-2-甲基丙磺酸 - 丙烯酸酯(AA / AMPS / HPA)三元共聚物,以干燥形式存在
3917.29.0090 Molded acrylonitrile-butadiene-styrene (ABS) tubes, of a kind used to effect the sterile transfer of fluid from a bag or vial to another container, each tube measuring 7.5 cm or more but not exceeding 23 cm in length, with an inner diameter of less than 0.65 cm and an outer diameter of less than 9 cm, one end having been angle-cut to form a spike, and having an integrated flange, less than 3 cm in diameter (splash guard) near the spike end and removable polyethylene caps on each end, put up in sterile packing 模制丙烯腈 - 丁二烯 - 苯乙烯(ABS)管,用于实现从袋或小瓶到另一个容器的无菌流体转移,每个管长7.5厘米或更长但不超过23厘米,内径小于0.65厘米,外径小于9厘米,一端经过角切割以形成长钉,并且具有一个整体凸缘,直径小于3厘米(防溅罩)靠近长钉端和可拆卸聚乙烯每端都有盖子,装在无菌包装中
3919.10.2020 Electrical tape of polyvinyl chloride, in rolls, measuring not more than 2 cm in width, not more than 20.2 m in length, and not more than 0.18 mm in thickness 聚氯乙烯电子胶带,卷成宽度不超过2厘米,长度不超过20.2米,厚度不超过0.18毫米
3919.10.2030 Transparent tape of plastics with an acrylic emulsion adhesive, in rolls measuring not over 4.8 cm in width, valued not over $.25 per square meter 带有丙烯酸乳液粘合剂的透明塑料胶带,卷尺宽度不超过4.8厘米,价值不超过每平方米0.25美元
3919.10.2055 Rolls of polyethylene film coated with a solvent acrylic adhesive 涂有溶剂丙烯酸粘合剂的聚乙烯薄膜卷
3920.43.5000 Rolls of polyvinyl chloride, measuring 2.5 cm or more but not exceeding 5.1 cm in width and 182.9 m in length 聚氯乙烯卷,宽2.5厘米或更宽,但宽度不超过5.1厘米,长度为182.9米
3920.62.0090 Films coated on one or both sides with polyvinylidene chloride (PVdC) or polyvinyl alcohol (PVOH), whether or not having a primer layer between the base and coating; any of the foregoing having a total thickness greater than 0.01 mm but not greater than 0.03 mm 在一面或两面涂有聚偏二氯乙烯(PVdC)或聚乙烯醇(PVOH)的薄膜,无论底漆和涂层之间是否有底漆层;任何前述的总厚度大于0.01mm但不大于0.03mm
3921.12.1100 Printed film of polyvinyl chloride, laminated with foamed-polyvinyl chloride-coated polyester scrim, in rolls, of a kind used for lining shelves or drawers 聚氯乙烯印刷薄膜,层压有泡沫聚氯乙烯涂层的聚酯稀松布,卷状,用于衬里搁板或抽屉
3921.19.0000 Sheets and strips consisting of both cross-linked polyethylene and ethylene vinyl acetate, of a width greater than 1 m but not greater than 1.5 m, and a length greater than 1.75 m but not greater than 2.6 m 由交联聚乙烯和乙烯醋酸乙烯酯组成的片材和条带,宽度大于1米但不大于1.5米,长度大于1.75米但不大于2.6米
3921.90.1500 Polyethylene sheet and film laminated with spunbond-spunbond-spunbond nonwoven polypropylene fabric, measuring 1.12 cm or more but not exceeding 1.52 cm in width and 1.93 cm or more but not exceeding 2.29 cm in length, and weighing 55 g/m2 or more but not exceeding 88 g/m2 用纺粘 - 纺粘 - 纺粘非织造聚丙烯织物层压的聚乙烯薄膜和薄膜,宽1.12厘米但不超过1.52厘米,长1.93厘米或不超过2.29厘米,重量不超过55克/平方米但不包括超过88克/平方米
7308.90.3000 Girders of iron or steel, meeting ASTM standard A572, Grades 50, 65 or 70 铁或钢梁,符合ASTM标准A572,等级50,65或70
7308.90.3000 Pipes of iron or steel, with connectors, meeting ASTM standard A572, Grade 50 带连接器的铁或钢管,符合ASTM标准A572,50级
7308.90.3000 Posts of steel pipe and tube, with ball knobs attached 钢管和钢管的柱子,附有球形旋钮
7308.90.3000 Posts of steel pipe and tube, with sill plates and ball studs attached 钢管和钢管柱,附有门槛板和球头螺栓
7308.90.3000 Rib nodes of iron or steel, meeting ASTM standard A572, Grades 50, 65 or 70 铁或钢的罗纹节点,符合ASTM标准A572,等级50,65或70
8544.60.6000 Monopolar conductors for a voltage exceeding 1,000 V, other than of copper and not fitted with connectors 单极导体,电压超过1,000 V,铜线以外,未安装连接器
8711.60.0050 or
8711.60.0090
(2019-07-01之前)
8711.60.0000
(2019-07-01之后)
Motorcycles with electric power for propulsion, each of a power not exceeding 1,000 W 电动摩托车,每个功率不超过1000瓦


160亿未获得有效期延长的共涉及46个税号下72项产品;这72项产品9月20日起恢复加征25%关税

2019年9月20日美国针对160亿美元(第二批)商品豁免清单
合计第十批
此次没有排除,9月20日起恢复加征25%关税名单
美国税号 恢复加征25%关税产品(英文版) 恢复加征25%关税产品(中文参考版)
3906.90.5000 Copolymers of acrylic acid and 2-acrylamide-2-methylpropanesulfonic acid, valued at $5.40 to $5.60 per kg 丙烯酸和2-丙烯酰胺-2-甲基丙磺酸的共聚物,价格为每公斤5.40美元至5.60美元
3911.10.0000 Granular hydrocarbon resins, each pellet not larger than 1 cm in any dimension and having a melting point greater than 95 degrees C but not greater than 105 degrees C, presented in immediate packings of paper,paperboard or kraft paper weighing with their contents greater than 23 kg but not greater than 27 kg 颗粒状烃类树脂,每个颗粒在任何尺寸上不大于1厘米,熔点大于95摄氏度但不大于105摄氏度,立即包装纸,纸板或牛皮纸,其内容物大于23 kg但不大于27 kg
3916.20.0020 Profile shapes, of a kind used in producing door jambs, composed of a composite of polyvinyl chloride, calcium carbonate and sawdust 用于生产门侧柱的型材形状,由聚氯乙烯,碳酸钙和锯末的复合物组成
3917.23.0000 Hose of braided polyvinyl chloride, having crimped fittings, designed to carry water, valued not over $2.00 per kg 编织聚氯乙烯软管,具有压接配件,设计用于携带水,价值不超过每公斤2.00美元
3917.29.0090 Polymer strips curled in helical fashion to form a flexible tube having a constant circular cross-section with a diameter not exceeding 2 cm 聚合物条带以螺旋方式卷曲以形成具有恒定圆形横截面的柔性管,其直径不超过2cm
3917.32.0050 Drinking straws, of plastics, each straw 8 mm or more in outside diameter and 20 cm or more in length 吸管,塑料,每根吸管外径8毫米或以上,长度20厘米或以上
3917.40.0090 Bulkhead fittings, each comprising a hollow, threaded cylindrical body with a hexagonal or octagonal head on one end, of a length 9.53 cm or more but not exceeding 23.5 cm and having an inside diameter of 1.27 or more but not exceeding 15.24 cm, a polymer gasket and a hexagonal or octagonal tightening nut 隔板配件,每个包括一个中空的螺纹圆柱体,一端带六角形或八角形头,长度为9.53厘米或以上但不超过23.5厘米,内径为1.27或更大但不超过15.24厘米,聚合物垫圈和六角形或八角形紧固螺母
3917.40.0090 Polyacetal brackets for connectors, of a length measuring 3.84 cm or more but not exceeding 4.57 cm, a width of 0.838 cm and a height of 2.15 cm 连接器用聚缩醛支架,长度为3.84厘米或以上但不超过4.57厘米,宽度为0.838厘米,高度为2.15厘米
3917.40.0090 Polyacetal filters measuring 3.76 cm x 3.76 cm x 0.31 cm 聚缩醛过滤器,尺寸为3.76厘米×3.76厘米×0.31厘米
3917.40.0090 Polyacetal hose barb fittings, with a length of 2.27 cm, width of 0.99 cm and height of 2.29 cm 聚缩醛软管倒钩配件,长2.27厘米,宽0.99厘米,高2.29厘米
3917.40.0090 Tube, pipe and hose couplings and connectors of plastics, with maximum outside dimensions of 6.5 cm by 6.35 cm by 6.35 cm 管,管和软管接头和塑料连接器,最大外部尺寸为6.5厘米×6.35厘米×6.35厘米
3917.40.0090 Y-shaped fittings of plastics, each measuring 6.99 cm in length and 3.18 cm or more but not exceeding 3.81 cm in width and height, incorporating a valve stem of plastics and brass in its center 塑料的Y形配件,每个长6.99厘米,宽3.18厘米,但宽度和高度不超过3.81厘米,中间装有塑料和黄铜阀杆
3920.20.0055 Heat-sealable printed films, of plastics, having a thickness of more than 20 microns but not more than 30 microns, in rolls wider than 15 cm but not more than 20 cm 可热封的塑料印刷薄膜,厚度大于20微米但不大于30微米,卷宽大于15厘米但不大于20厘米
3920.43.5000 Sheets of polyvinyl chloride, in rolls measuring 1.5 m or more in width, printed in various colors, valued at $1.60 to $1.90 per kg 聚氯乙烯薄片,卷宽1.5米或以上,印刷各种颜色,价格为每公斤1.60至1.90美元
3920.43.5000 Sheets of polyvinyl chloride, measuring 2.44 mm or more but not exceeding 3.66 m in width, 3.05 or more but not exceeding 5.18 m in length and 0.5 cm in thickness 聚氯乙烯片材,宽度2.44毫米或以上但宽度不超过3.66米,长度3.05或以上但不超过5.18米,厚度0.5厘米
3920.43.5000 Sheets of polyvinyl chloride, measuring 47.5 cm in width, 61.0 cm in length and 24 mm in thickness, coated on both sides with a printable primer 聚氯乙烯片材,宽47.5厘米,长61.0厘米,厚24毫米,两面涂有可印刷底漆
3920.43.5000 Sheets of transparent (double polished or super double polished) polyvinyl chloride, whether or not with an integrated pattern, in rolls, measuring 1.37 m or more but not exceeding 1.83 m in width, not more than 54.9 m in length, and 0.075 mm or more but not exceeding 0.51 mm in thickness, valued at $2.35 or more but not exceeding $3.35 per square meter 透明(双抛光或超双抛光)聚氯乙烯片材,无论是否具有整体图案,均为卷状,宽度为1.37米或更长但不超过1.83米,长度不超过54.9米,或0.075毫米或厚度不超过0.51毫米,价值2.35美元或以上但不超过每平方米3.35美元
3920.49.0000 Uncoated polyvinyl chloride (PVC) film, containing by weight less than 6% of plasticizers, less than 0.07 mm in thickness, in rolls weighing 1 t or more 无涂层聚氯乙烯(PVC)薄膜,含重量小于6%的增塑剂,厚度小于0.07毫米,卷重1吨或以上
3920.99.2000 Sheets of transparent polyurethane, measuring 112 cm in width and 112 cm or more but not exceeding 168 cm in length, whether or not put up in sterile packaging 无论是否装在无菌包装中,透明聚氨酯板材,宽112厘米,长112厘米或不超过168厘米
3921.12.1100 Three-ply polyvinyl chloride film laminated with nonwoven polyester scrim, in rolls, measuring not more than 5 m in width and not more than 91.5 m in length, valued at $2.10 or more but not exceeding $2.40 per square meter 三层聚氯乙烯薄膜,层压有非织造聚酯稀松布,成卷,宽度不超过5米,长度不超过91.5米,价值2.10美元或以上但不超过每平方米2.40美元
3921.12.5000 Sheets of foamed polyvinyl chloride combined with a non-textile moisture barrier, in rolls, measuring 45.7 cm in width and 1.83 m in length, each roll weighing not more than 0.39 kg 发泡聚氯乙烯片材与非织物防潮层相结合,成卷为45.7厘米宽,长1.83米,每卷重量不超过0.39千克
3921.13.1500 Synthetic leather sheeting, comprising three layers of polycarbonate-type polyurethane, the outer layer surface treated, the middle layer of foamed polyurethane, and the bottom adhesive layer combined with a support layer of polyester knit fabric, weighing 441 g or more but not exceeding 539 g per square meter, in rolls, measuring 1.4 m or more but not exceeding 1.5 m in width and 20 m or more in length 合成皮革薄片,包括三层聚碳酸酯型聚氨酯,外层表面处理,泡沫聚氨酯中间层,底部粘合剂层与聚酯针织物支撑层相结合,重量441克或以上但不超过539每平方米g,以卷为单位,宽度为1.4米或更长但宽度不超过1.5米,长度为20米或更长
3921.14.0000 Cellular regenerated cellulose plates (blocks), measuring 99.1 cm by 99.1 cm by 35.6 cm 细胞再生纤维素板(块),尺寸为99.1厘米×99.1厘米×35.6厘米
3921.19.0000 Non-adhesive translucent ethylene-vinyl acetate, in sheets or rolls, of a kind used for shelf liners 用于货架衬里的非粘性半透明乙烯 - 乙酸乙烯酯,片状或卷状
3921.19.0000 Plates composed of layers of closed-cell ethylene-vinyl acetate and polyethylene foam, in rectangular shapes, each having a surface area of 2 m² or more but not greater than 2.25 m² 由闭孔乙烯 - 醋酸乙烯酯和聚乙烯泡沫层组成的板,呈矩形,每个表面积为2m²或更大但不大于2.25m²
3921.90.1100 Sheets of noncellular polyvinyl chloride combined with man-made textile fabric, valued at $6.15 or more but not exceeding $6.30 per square meter 非细胞聚氯乙烯片与人造纺织面料相结合,价值6.15美元或以上但不超过每平方米6.30美元
3921.90.1950 Plastics sheeting made up of plain-woven, high-density polyethylene fabric coated on both sides with low-density polyethylene, in rolls measuring 5 m in width 塑料薄膜由普通编织的高密度聚乙烯织物制成,两面均涂有低密度聚乙烯,卷宽5米
3921.90.4090 Sheets of transparent (double polished or super double polished) laminated polyvinyl chloride, whether or not with an integrated pattern, in rolls, measuring 1.37 m or more but not exceeding 1.83 m in width, not more than 54.9 m in length, and 0.075 mm or more but not exceeding 0.51 mm in thickness, valued at $2.35 or more but not exceeding $3.35 per square meter 透明(双抛光或超双抛光)层压聚氯乙烯片材,无论是否具有整体图案,均为卷状,宽度为1.37米或更长但不超过1.83米,长度不超过54.9米,0.075毫米厚度不超过0.51毫米,价值2.35美元或以上但不超过每平方米3.35美元
3921.90.4090 Sheets of transparent (double polished or super double polished) polyvinyl chloride, whether or not with an integrated pattern, in rolls, measuring 1.37 m but not exceeding 1.83 m in width, not more than 54.9 m in length, and 0.075 mm but not exceeding 0.51 mm in thickness, valued at $2.35 or more but not exceeding $3.35 per square meter 透明(双抛光或超双抛光)聚氯乙烯片,无论是否带有整体图案,成卷,宽1.37米但宽不超过1.83米,长度不超过54.9米,0.075毫米但不超过厚度0.51毫米,价值2.35美元或以上,但每平方米不超过3.35美元
7308.90.3000 Steel upstand support members 钢制立柱支撑构件
7308.90.9590 Angle feed racks of galvanized steel, designed for use in the feeding of livestock 镀锌钢角架,设计用于牲畜饲养
7308.90.9590 Animal kennels of iron or steel 动物狗窝铁或钢
7308.90.9590 Balusters or spindles, of iron or steel, designed for use in handrails 设计用于扶手的铁或钢的栏杆或锭子
7308.90.9590 Chain link fence panels, and fence panel stands and bases, of iron or steel 链条围栏板,围栏板架和铁或钢基座
7308.90.9590 Elongated half loops of galvanized steel 细长半圈镀锌钢
7308.90.9590 Gazebos, pergolas and trellises of iron or steel 凉亭,藤架和铁或钢架
7308.90.9590 Lockup frames of galvanized steel, of a length exceeding 3.0 m, designed for use in controlling the movement of livestock 镀锌钢锁定框架,长度超过3.0米,设计用于控制牲畜的移动
7308.90.9590 Steel plate assemblies conforming to ASTM A709 Grade 50 钢板组件符合ASTM A709 Grade 50标准
7308.90.9590 Tubes of galvanized steel, coped (notched) on one end, of a length not exceeding 1.0 m 镀锌钢管,一端加工(缺口),长度不超过1.0米
7610.90.0080 Structural angles of aluminum, in a V shape with a 90 degree angle, for sliding or rolling driveway gates, in packages containing 2 or 3 angles, with each piece of a length exceeding 1.5 m but not exceeding 2.0 m and a width exceeding 4 cm but not exceeding 8 cm 铝制结构角度,呈90度角V形,用于滑动或滚动车道闸门,包含2或3个角度的包装,每件长度超过1.5米但不超过2.0米,宽度超过4厘米但不超过8厘米
8407.90.1010 Spark-ignition reciprocating or rotary internal combustion piston engines, to be installed in agricultural or horticultural machinery or equipment, each rated at less than 4,200 W 火花点火往复式或旋转式内燃活塞发动机,安装在农业或园艺机械或设备中,每个额定功率低于4,200 W
8407.90.9060 Spark-ignition reciprocating or rotary internal combustion piston engines, not elsewhere specified or included, each rated at 4,476 W or more but not exceeding 18.65 kW, with an engine displacement of not more than 690 cc 火花点火往复式或旋转式内燃活塞发动机,未在其他地方指定或包括在内,每个额定功率为4,476 W或更高但不超过18.65 kW,发动机排量不超过690 cc
8419.89.9540 Cold plates for preparing tissue samples 用于制备组织样品的冷板
8419.89.9540 Quenching devices designed to lower the temperature of steel plate using water, each consisting of top cooling headers, bottom cooling headers, a side sweep header, a common control manifold that feeds all the headers, a main supporting frame to support all bottom headers and bottom rolls, a top header supporting sub-frame to support the top headers and top rolls, five top and five bottom rolls, neck bearings, drives and on board piping 淬火装置设计用于降低使用水的钢板温度,每个装置包括顶部冷却集管,底部冷却集管,侧扫头,一个供给所有集管的公共控制歧管,一个支撑所有底部集管和底部的主支撑框架卷筒,顶部支架支撑子框架,支撑顶部集管和顶部辊子,五个顶部和五个底部辊子,颈部轴承,驱动器和板上管道
8419.89.9585 Cold plate machines, each incorporating a flat heat-absorbing metal plate capable of lowering the temperature of paraffin from a liquid to a solid phase, designed for use with microtomes 冷板机,每个都包含一个平板吸热金属板,能够将石蜡的温度从液体降低到固相,设计用于切片机
8432.29.0060 Walk behind rotary tillers, electrically powered, each weighing less than 16 kg 走动旋转分蘖,电动,每个重量不到16公斤
8432.29.0090 Scarifiers 松土机
8464.10.0100 Tile saws 瓷砖锯
8466.30.8000 Band saw guards 带锯
8466.30.8000 Grinder stands, pedestal rollers and other tool and workpiece stands, supports and platforms 磨床支架,底座滚轮和其他工具和工件支架,支架和平台
8466.30.8000 Power tool mounts 电动工具安装座
8475.29.0000 Machines for manufacturing laminated or insulated glass, each machine valued over $100,000 用于制造层压或隔热玻璃的机器,每台机器价值超过100,000美元
8483.30.8090 Plain shaft bearings and bushings, without housings, each valued not over $3 不带轴承座的普通轴轴承和轴套,每件价值不超过3美元
8486.90.0000 Parts and accessories, not elsewhere specified or included, each valued not over $2800 零件和配件,未在其他地方指定或包括在内,每件价值不超过2800美元
8501.10.6040 Brushless DC motors, rated at 24V, designed for use in saltwater aquariums 无刷直流电机,额定电压为24V,专为海水水族箱设计
8501.32.2000 DC motors, each of an output exceeding 25 W but not exceeding 2.0 kW 直流电动机,每个输出功率超过25 W但不超过2.0 kW
8501.32.2000 DC motors, each of an output not exceeding 25 W 直流电机,每个输出功率不超过25 W.
8501.32.2000 DC motors, of an output exceeding 750 W but not exceeding 14.92 kW, each with attached actuators, crankshafts or gears 直流电动机,输出功率超过750 W但不超过14.92 kW,每个都带有连接的执行器,曲轴或齿轮
8503.00.9550 Parts of generators (other than parts of general use as defined in note 2 to section XV), each valued not over $10 发电机的部件(第15节注释2中定义的一般用途部件除外),每个价值不超过10美元
8536.50.7000 Electronic AC lighting control switches, for dimming and turning lights on and off, packaged for retail sale 电子交流照明控制开关,用于打开和关闭调光和转向灯,零售包装
8541.10.0080 Surface-mount glass passivated rectifiers with a rectified output current not exceeding 1.25 A 表面贴装玻璃钝化整流器,整流输出电流不超过1.25 A.
8541.10.0080 Surface-mount transient voltage suppressors having a peak pulse power capacity not exceeding 5 A 表面贴装瞬态电压抑制器,峰值脉冲功率容量不超过5A
8541.10.0080 Zener diodes having an admissible zener current of not more than 0.15 A at 25 degrees C 齐纳二极管在25℃下具有不大于0.15A的允许齐纳电流
8541.40.6015 Crystalline silicon photovoltaic cells of a kind described in statistical note 11 to chapter 85, made up into panels with a surface area not exceeding 3,061 cm2 统计说明11至85章中描述的一种晶体硅光伏电池,制成表面积不超过3,061 cm2的面板
8541.40.6015 and
8541.40.6035
Solar panels, each of a surface area not exceeding 3,100 cm2 太阳能电池板,每个表面积不超过3,100平方厘米
8544.49.2000 16-gauge 2-conductor wire, not fitted with connectors, for a voltage not exceeding 80 V 16规格2芯导线,未安装连接器,电压不超过80 V.
8544.49.2000 Electric conductors, not fitted with connectors, for a voltage not exceeding 80 V, each overmolded with polypropylene 电导体,未安装连接器,电压不超过80 V,每个都用聚丙烯包覆成型
8607.19.3010 Truck bolsters for railway cars, each weighing more than 650 kg 用于铁路车辆的卡车支架,每个重量超过650千克
8607.19.3020 Truck side frames for railway cars, each weighing more than 400 kg 用于铁路车辆的卡车侧架,每个重量超过400千克
8711.60.0050 Skateboards with electric power for propulsion, of a power not exceeding 250 W 用于推进电力的滑板,功率不超过250瓦
8713.90.0030 Three-wheeled carriages for disabled persons, with electric power for propulsion, each carriage having a second passenger seat capable of being stowed and a foot-operated brake 用于残疾人的三轮车厢,具有用于推进的电力,每个车厢具有能够被收起的第二乘客座椅和脚踏制动器
9025.19.8080 Thermometers comprising cable assemblies with sensors, suitable for use in swimming pools, not combined with other instruments, valued not over $10 each 温度计包括带传感器的电缆组件,适用于游泳池,不与其他仪器结合使用,每个价值不超过10美元


本次340亿美元加征关税第二批(2019年9月20日)排除清单获得延长清单共涉及52个税号62项产品:未获得有效期延长的共涉及175个税号下248项产品;这248项产品9月20日起恢复加征25%关税。

340亿美元加征关税排除清单获得延长清单共涉及52个税号62项产品(继续排除至2020年12月31日)

2019年9月20日美国针对340亿(第7批)美元商品豁免清单
合计第九批
继续排除至2020年12月31日商品目录

8413.70.2004 Submersible centrifugal pumps (other than fuel, lubricating or cooling medium pumps for internal combustion piston engines; other than stock pumps imported for use with machines for making cellulosic pulp, paper or paperboard), not fitted or designed to be fitted with a measuring device, the foregoing capable of operating at 3,700 liters or more but not exceeding 41,000 liters per hour 潜水离心泵(用于内燃活塞发动机的燃料,润滑或冷却介质泵除外;进口用于制造纤维素纸浆,纸或纸板的机器的原料泵),未安装或设计用于安装测量装置,上述能够以每小时3,700升或更多但不超过41,000升的速度运行
8413.70.2004 Tabletop water fountains designed for indoor use, the essential character of which is imparted by submersible centrifugal pumps 桌面喷泉设计用于室内,其基本特征是由潜水离心泵提供
8414.30.8060 Rotary compressors, each exceeding 746 W but not exceeding 2,238 W, with a cooling capacity ranging from 2.3 kW to 5.5 kW  旋转式压缩机,每台都超过746 W但不超过2,238 W,制冷量为2.3 kW至5.5 kW
8420.10.9040 Thermal roll laminators, each valued not over $450 热辊层压机,每个价值不超过450美元
8420.99.9000 Cutting pads, platforms, base plates, pads, shims, trays, which function as guides for hand-operated table-top calendering machines of a width not exceeding 51 cm 切割垫,平台,底板,垫,垫片,托盘,用作宽度不超过51厘米的手动台式压光机的导轨
8421.21.0000 Ionization filters valued over $35 but not over $45 each 电离滤波器价值超过35美元,但每个不超过45美元
8421.39.8090 Disposable plastic filters of a kind suitable for filtering and dehumidifying a patient's breath in a medical device such as a gas analyzer 一次性塑料过滤器,适用于在医疗设备(如气体分析仪)中过滤和除湿患者的呼吸
8421.99.0040 Parts of swimming pool vacuum cleaners 游泳池吸尘器的零件
8422.90.0640 3-member slides with ball bearings, of stainless steel, for use in household dishwashers 带有球轴承的3件式滑块,由不锈钢制成,用于家用洗碗机
8429.51.1055 Shovel loaders, each with a bucket capacity of 11.4 m3 to 12 m3, and an operating weight of 30,000 kg or more but not exceeding 36,000 kg 铲斗装载机,每个铲斗容量为11.4 m3至12 m3,操作重量为30,000 kg或更多,但不超过36,000 kg
8436.80.0090 Animal feeding machinery 动物饲养机械
8436.99.0090 Parts of animal feeding machinery 动物饲养机械的零件
8443.99.2010 Ink cartridges, each weighing more than 1 kg 墨盒,每个重量超过1公斤
8443.99.2050 Printer maintenance kits consisting of two or more replacement parts for printer units of subheading 8443.32.10 specified in additional U.S. note 2 to chapter 84 打印机维护套件包括两个或多个更换部件,用于在第84章附加说明中指定的副标题8443.32.10的打印机单元
8458.19.0020 Horizontal lathes for removing metal, electrically powered, not numerically controlled, each with mill head attachment mounted above the lathe headstock 用于移除金属的卧式车床,电动的,非数字控制的,每个都具有安装在车床主轴箱上方的铣头附件
8459.61.0080 New numerically-controlled milling machines capable of end beveling pipe of an outside diameter of 60 cm or more but not exceeding 305 cm 新型数控铣床,能够对外径为60厘米或以上但不超过305厘米的斜切管
8462.29.0030 Press brakes, not numerically controlled, having a drive capacity rating of 3kW 压制制动器,不受数字控制,驱动能力等级为3kW
8462.39.0050 New hydraulic shearing machines, not numerically controlled, with a power of 7.5 kW, valued at $3,025 or more each 新型液压剪切机,非数字控制,功率为7.5千瓦,每个价值3,025美元或更多
8466.10.0175 Tool holders of a kind used to hold various types of metal working tools for use on milling machine spindles 一种用于固定各种类型金属加工工具的刀架,用于铣床主轴
8479.82.0040 Modularized plants for the manufacture of lithium hydroxide by functions involving mixing, kneading or stirring 用于通过混合,捏合或搅拌的功能制造氢氧化锂的模块化设备
8481.90.9020 Ball type angle cock valve bodies, of cast iron, for oleohydraulic or pneumatic transmissions 球形角阀旋塞阀,铸铁,用于油液压或气动传动装置
8481.90.9020 Valve bodies, of aluminum, of valves for oleohydraulic or pneumatic transmissions 用于油液压或气动传动的阀门的铝制阀体
8481.90.9040 Hydraulic valve parts, other than valve bodies, of valves for oleohydraulic or pneumatic transmissions, each valued not over $5 用于油压或气动传动的阀门除阀体外的液压阀部件,每个价值不超过5美元
8482.10.5028 Angular contact ball bearings, not for use with wheel hub bearing units, having an inner diameter of 25 mm or greater but not exceeding 55 mm, an outer diameter of 50 mm or greater but not exceeding 95 mm, a width of 20 mm or greater but not exceeding 35 mm, with single or double row of steel balls and a cage of steel or plastics 角接触球轴承,不适用于轮毂轴承单元,内径为25 mm或更大但不超过55 mm,外径为50 mm或更大但不超过95 mm,宽度为20 mm或更大但不超过35毫米,单排或双排钢球和钢或塑料保持架
8482.10.5028 Angular contact ball bearings, not over 40 mm in width, other than wheel hub bearing units 角接触球轴承,宽度不超过40 mm,轮毂轴承单元除外
8501.10.4020 AC motors, C-frame single-phase induction-type, without external housing, of an output not exceeding 18.65 W, not synchrous, each valued not over $20 交流电机,C型单相感应式,无外壳,输出功率不超过18.65 W,不同步,每个价值不超过20美元
8501.31.2000 DC motors, of an output exceeding 37.5 W but not exceeding 74.6 W, valued over $2 but not over $30 each 直流电机,输出功率超过37.5 W但不超过74.6 W,价值超过2美元但不超过30美元
8501.51.4040 AC motors, multi-phase, of rolled steel frame construction 交流电动机,多相,轧制钢框架结构
8501.53.8040 AC motors, multi-phase, of an output of 186.5 kW or more but not exceeding 373 kW, having a cast iron frame construction 交流电动机,多相,输出功率为186.5 kW或更高但不超过373 kW,采用铸铁框架结构
8504.90.7500 Dual layer printed circuit board assemblies, each valued over $30 but not over $35 双层印刷电路板组件,每个价值超过30美元但不超过35美元
8525.60.1050 Transceivers, 10-meter, not hand-held, for operation in infrequencies of 28.000 to 29.700 MHz 收发器,10米,非手持式,可在28.000至29.700 MHz的频率范围内工作
8536.50.9055 Limit switches, for a voltage not exceeding 1,000 V, each valued over $19 but not over $32 限位开关,电压不超过1,000 V,每个价值超过19美元但不超过32美元
8536.50.9065 Modular light switches, for a voltage not exceeding 1,000 V, presented in polyethylene terephthalate (PET) housings, designed for use with a backplate 模块化灯开关,电压不超过1,000 V,采用聚对苯二甲酸乙二醇酯(PET)外壳,设计用于背板
8536.50.9065 Switches designed for use in motor vehicles, driver or passenger activated 设计用于机动车辆,驾驶员或乘客的开关
8536.69.4010 Coaxial connectors, for a voltage not exceeding 1,000 V, valued over $0.20but not over $0.30 each 同轴连接器,电压不超过1,000 V,价值超过0.20美元,但每个不超过0.30美元
8536.90.4000 Butt splice connectors, for a voltage not exceeding 1,000 V, each valued not over $3 对接接头,电压不超过1,000 V,每个价值不超过3美元
8536.90.4000 Ring terminals, for a voltage not exceeding 1,000 V 环形端子,电压不超过1,000 V.
8536.90.4000 Twist-on wire connectors, for a voltage not exceeding 1,000 V, each valued not over $0.03 扭绞式电线连接器,电压不超过1,000 V,每个值不超过0.03美元
8543.10.0000 S-band and X-band linear accelerators designed for use in radiation surgery or radiation therapy equipment S波段和X波段线性加速器设计用于放射手术或放射治疗设备
8703.21.0110 Four-wheel off-road vehicles, with only spark-ignition internal combustion reciprocating piston engines, of a cylinder capacity not exceeding 1,000 cc, with straddle seat and handlebar control, each with label indicating that vehicle is for operation only by persons at least 16 years of age, each valued not over $5000 四轮越野车,只有火花点火式内燃往复式活塞发动机,气缸容量不超过1,000毫升,带有跨座和车把控制装置,每个都带有标签,表明车辆仅供至少16人使用年龄,每个价值不超过5000美元
8709.11.0030 Works trucks, electrical, operator riding, each of a curb weight exceeding 8,500 kg but not exceeding 9,500 kg 工作卡车,电动,操作员骑行,每个重量超过8,500千克但不超过9,500千克
9014.80.2000 Depth-sounding apparatus, each valued not over $50 深度探测仪器,每个价值不超过50美元
9018.11.9000 Disposable electrocardiograph (ECG) electrodes 一次性心电图(ECG)电极
9018.12.0000 Portable ultrasonic scanner consoles, each weighing less than 4 kg, presented with or without transducer 便携式超声波扫描仪控制台,每个重量不超过4千克,带或不带传感器
9018.19.9550 Digital peak flow meters suitable for use by medical professionals 适用于医疗专业人员的数字峰值流量计
9018.19.9550 Fingertip pulse oximeters suitable for use by medical professionals 指尖脉搏血氧仪适合医疗专业人员使用
9018.19.9560 Bismuth germanate crystals with set dimensional and surface finish requirements and used as a detection element in Positron Emission Tomography (PET) detectors 具有固定尺寸和表面光洁度要求的锗酸铋晶体,用作正电子发射断层扫描(PET)探测器中的检测元件
9018.19.9560 Magnetic resonance imaging ("MRI") patient enclosure devices, each incorporating radio frequency and gradient coils 磁共振成像(“MRI”)患者封闭装置,每个装置包括射频和梯度线圈
9018.19.9560 Parts and accessories of capnography monitors 二氧化碳监测仪的零件和配件
9018.90.2000 Otoscopes 耳镜
9018.90.3000 Anesthesia masks 麻醉面罩
9018.90.6000 Electrosurgical cautery pencils with electrical connectors 有电子连接器的Electrosurgical烧灼铅笔
9018.90.7580 Printed circuit board assemblies designed for use in displaying operational performance of medical infusion equipment 印刷电路板组件设计用于显示医用输液设备的操作性能
9022.90.2500 X-ray tables X光台
9022.90.4000 X-ray tube housings and parts thereof X射线管外壳及其部件
9022.90.6000 Parts and accessories, of metal, for mobile X-ray apparatus 金属零件和附件,用于移动式X射线设备
9022.90.6000 Printed circuit board assemblies, of a kind designed for use in X-ray apparatus 印刷电路板组件,设计用于X射线设备
9022.90.6000 Vertical stands specially designed to support, contain or adjust the movement of X-ray digital detectors, or the X-ray tube and collimator in complete X-ray diagnostic systems 垂直支架专门设计用于支持,容纳或调整X射线数字探测器或X射线管和准直器在完整X射线诊断系统中的运动
9022.90.9500 Thermoplastic masks for radiation therapy, affixed to the treatment table when used, each valued over $18 but not over $23 用于放射治疗的热塑性面罩,使用时贴在治疗台上,每个价值超过18美元但不超过23美元
9032.10.0030 Automatic thermostats for heating, ventilation and air conditioning systems, containing temperature and humidity sensors, designed for wall mounting 用于加热,通风和空调系统的自动恒温器,包含温度和湿度传感器,专为墙壁安装而设计
9032.89.4000 Battery balancers designed for regulating voltage across batteries, other than for 6, 12 or 24 volt systems 电池平衡器设计用于调节电池电压,而不是6,12或24伏系统
9032.90.6120 Thermostat covers 温控器盖


340亿美元加征关税未获得有效期延长的共涉及175个税号下248项产品;这248项产品9月20日起恢复加征25%关税
 
2019年9月20日美国针对340亿(第7批)美元商品豁免清单
合计第九批
此次没有排除,9月20日起恢复加征25%关税名单
美国税号 具体排除产品(英文版) 具体排除产品(中文参考版)
8402.90.0010 Heat exchangers, the foregoing comprising parts of goods of heading 8402 and each fitted for heat recovery generator 热交换器,前述包括标题8402的部分货物,并且每个都适合于热回收发生器
8412.29.8045 Hydraulic powered swing, winch and travel drives, axial piston type, with attached gearboxes, each valued over $2,000 but not over $7,000 液压动力摆动,绞车和行走驱动,轴向活塞式,带附加变速箱,每个价值超过2,000美元但不超过7,000美元
8413.19.0000 Lubricating oil transfer pumps, fitted or designed to be fitted with a measuring device, each with a 1.5 kW motor 润滑油输送泵,安装或设计为配有测量装置,每个都配有1.5 kW电机
8413.50.0010 Oil well and oil field reciprocating positive displacement plunger pumps 油井和油田往复式正排量柱塞泵
8413.50.0090 Positive displacement piston liquid pumps designed for use with gas or electric powered pressure washers, rated for an output of 7 liters or more but not exceeding 16 liters per minute at a pressure of 17 MPa or more but not exceeding 28 MPa 位移活塞式液体泵设计用于气体或电动高压清洗机,额定输出功率为7升或更高但不超过16升/分钟,压力为17 MPa或更高但不超过28 MPa
8413.60.0090 Non-hydraulic rotary positive displacement pumps, not configured as roller pumps, each weighing less than 5.5 kg and valued not over $25 非液压旋转式正排量泵,未配置为滚子泵,每个重量小于5.5千克,价值不超过25美元
8413.70.2004 Submersible centrifugal pumps (other than fuel, lubricating or cooling medium pumps for internal combustion piston engines other than stock pumps imported for use with machines for making cellulosic pulp, paper or paperboard), not fitted or designed to be fitted with a measuring device; each of the foregoing incorporating a magnetic drive motor 潜水离心泵(用于内燃活塞发动机的燃料,润滑或冷却介质泵除了进口用于制造纤维素纸浆,纸或纸板的机器的原料泵),未安装或设计用于安装测量装置;前述每一个都包含磁驱动马达
8413.70.2004 Submersible centrifugal pumps (other than fuel, lubricating or cooling medium pumps for internal combustion piston engines), not fitted or designed to be fitted with a measuring device, the foregoing for table-top decorative use incorporating a cascading water feature 潜水离心泵(用于内燃活塞发动机的燃料,润滑或冷却介质泵除外),未安装或设计用于安装测量装置,前述用于桌面装饰用途,包括级联水功能
8413.70.2004 Submersible centrifugal pumps, not fitted or designed to be fitted with a measuring device; other than fuel, lubricating or cooling medium pumps for internal combustion piston engines; other than stock pumps imported for use with machines for making cellulosic pulp, paper or paperboard; the foregoing rated not over 1.5 kW 潜水离心泵,未安装或设计为配有测量装置;内燃活塞发动机的燃料,润滑或冷却介质泵除外;进口用于制造纤维素纸浆,纸张或纸板的机器的库存泵;前述额定功率不超过1.5千瓦
8413.70.2005 Non-submersible centrifugal pumps for liquids (other than fuel, lubricating or cooling medium pumps for internal combustion piston engines), not fitted or designed to be fitted with a measuring device, the foregoing comprising single-stage, single-suction, close-coupled, with a discharge outlet under 5.08 cm in diameter, valued over $4 but not over $6.50 each 用于液体的非潜水离心泵(用于内燃活塞发动机的燃料,润滑或冷却介质泵除外),未安装或设计用于安装测量装置,前述包括单级,单吸,紧耦合,排放口直径5.08厘米,价值超过4美元,但每个不超过6.50美元
8413.70.2015 Non-submersible centrifugal pumps for liquids (other than fuel, lubricating or cooling medium pumps for internal combustion piston engines), not fitted or designed to be fitted with a measuring device, the foregoing comprising single-stage, single-suction, close-coupled centrifugal motor pumps with a discharge outlet 5.08 cm or over in diameter, rated at 37 W or more but not exceeding 80 W and with a flow rate of 17 liters per minute or more 用于液体的非潜水离心泵(用于内燃活塞发动机的燃料,润滑或冷却介质泵除外),未安装或设计用于安装测量装置,前述包括单级,单吸,紧耦合离心式电动泵,出口直径5.08厘米或以上,额定功率为37瓦或以上但不超过80瓦,流速为每分钟17升或以上
8413.70.2022 Non-submersible centrifugal pumps for liquids (other than fuel, lubricating or cooling medium pumps for internal combustion piston engines), not fitted or designed to be fitted with a measuring device, the foregoing operating at a voltage of 120 V and a frequency of 60 Hz, valued over $4 but not over $9 each 用于液体的非潜水离心泵(内燃活塞式发动机的燃料,润滑或冷却介质泵除外),未安装或设计为配有测量装置,上述工作电压为120 V,频率为60 Hz,价值超过4美元但不超过9美元
8413.70.2025 Non-submersible centrifugal pumps for liquids (other than fuel, lubricating or cooling medium pumps for internal combustion piston engines), not fitted or designed to be fitted with a measuring device, the foregoing comprising single-stage, single-suction, close-coupled, with discharge outlet under 5.08 cm in diameter each valued over $150,000 用于液体的非潜水离心泵(用于内燃活塞发动机的燃料,润滑或冷却介质泵除外),未安装或设计用于安装测量装置,前述包括单级,单吸,紧耦合排放口直径5.08厘米,每个价值超过150,000美元
8413.81.0040 Pet water drinking fountains, not incorporating centrifugal pumps 宠物饮水机,不包括离心泵
8413.81.0040 Pumps (other than fuel, lubricating or cooling medium pumps for internal combustion piston engines, other than centrifugal pumps), not fitted or designed to be fitted with a measuring device, the foregoing rated at 37 W or more but not exceeding 80 W, with a flow rate of 17 liters or more per minute 泵(除了用于内燃活塞发动机的燃料,润滑或冷却介质泵,离心泵除外),未安装或设计用于安装测量装置,前述额定功率为37 W或更高但不超过80 W,流速为每分钟17升或更多
8413.91.9010 Tubes of copper alloy for use in solenoid fuel pumps, each valued not over $1 用于螺线管燃油泵的铜合金管,每个价值不超过1美元
8413.91.9095 Parts of pumps, other than fuel-injection pumps for compression-ignition engines or stock pumps imported for use with machines for making cellulosic pulp, paper or paperboard, the foregoing of plastics 用于压缩点火发动机的燃油喷射泵或用于制造纤维素纸浆,纸或纸板的机器的原料泵的泵的部件,上述塑料
8413.91.9095 Rods and couplings designed for use with oil and gas field pumps, the foregoing of American Petroleum Institute grade 设计用于油气田泵的杆和联轴器,前述美国石油学会等级
8413.91.9095 Volutes of a kind designed for use with centrifugal sump pumps 设计用于离心式污水泵的蜗壳
8414.30.4000 Air conditioner compressors of a kind used in motor vehicles 用于机动车辆的空调压缩机
8414.30.4000 Compressors designed for use in household refrigerators, not exceeding 187 W (1/4 horsepower), each valued not over $30 设计用于家用冰箱的压缩机,不超过187 W(1/4马力),每个价值不超过30美元
8414.30.4000 Single phase, rotating piston type rotary compressors with split capacitor motors and refrigerant pumps, valued not over $70 单相旋转活塞式旋转式压缩机,带分离式电容器电机和制冷剂泵,价值不超过70美元
8414.30.8060 Rotary compressors, each exceeding 746 W (1 horsepower) but not exceeding 2,984 W (4 horsepower), with a cooling capacity ranging from 750 to 1400 W 旋转式压缩机,每个超过746 W(1马力)但不超过2,984 W(4马力),冷却能力从750到1400 W
8414.30.8070 Scroll compressors, each exceeding 2,238 W (3 horsepower) but not exceeding 7,460 W (10 horsepower), valued over $250 but not over $500 each 涡旋压缩机,每台超过2,238 W(3马力)但不超过7,460 W(10马力),价值超过250美元但不超过500美元
8414.30.8080 Scroll-type compressors, each exceeding 7,460 W (10 horsepower), valued over $500 but not over $900 涡旋式压缩机,每台超过7,460 W(10马力),价值超过500美元但不超过900美元
8414.90.4165 Compressor housings designed for turbochargers 压缩机外壳专为涡轮增压器而设计
8417.80.0000 Mineral slab production equipment including exhaust gas treatment apparatus therefor 矿物板生产设备包括其废气处理设备
8417.80.0000 Twin reactor pyrolysis waste processing equipment consisting of two twin primary and one secondary processing units 双反应堆热解废物处理设备由两个双主处理单元和一个二级处理单元组成
8417.90.0000 Parts of dry hearth melting furnaces 干炉膛熔炉的部分
8418.69.0110 Portable domestic ice cube makers of stainless steel, valued not over $70 each 便携式不锈钢家用冰块制造商,价值不超过70美元
8418.69.0160 Absorption liquid chilling units valued over $130,000 each 吸收液体冷却装置每个价值超过130,000美元
8418.69.0180 Chest-type coolers, compression type, with an interior volume exceeding 440 liters but not exceeding 600 liters 压缩式胸式冷却器,内部容积超过440升但不超过600升
8418.69.0180 Upright freezers, compression type, with an interior volume exceeding 1,300 liters but not exceeding 2,100 liters 压缩式立式冷冻柜,内部容积超过1,300升但不超过2,100升
8419.50.1000 Brazed aluminum plate-fin heat exchangers, each valued not over $250 钎焊铝板翅式换热器,每个价值不超过250美元
8419.50.5000 Heat exchanger units, designed for use as part of a heat exchange system weighing more than 27 metric tons but not more than 32 metric tons and incorporating shell-and-tube type heat exchangers 换热器单元,设计用作重量超过27公吨但不超过32公吨的热交换系统的一部分,并采用管壳式换热器
8419.50.5000 Heat exchanger units, designed for use as part of a heat exchange system weighing more than 40 but not more than 44 metric tons and designed to incorporate an ethylene dichloride vent eductor liquid cooler 换热器单元,设计用作重量超过40但不超过44公吨的热交换系统的一部分,设计用于加入二氯乙烷排气喷射器液体冷却器
8419.50.5000 Heat exchanger units, designed for use as part of a heat exchange system weighing more than 63.5 metric tons and not designed to operate with chilled MCB Coolers using propylene refrigerant 换热器单元,设计用作热交换系统的一部分,重量超过63.5公吨,不适用于使用丙烯制冷剂的冷冻MCB冷却器
8419.50.5000 Heat exchanger units, designed for use individually or as part of a system weighing more than 63.5 metric tons and not designed to operate with chilled MCB coolers using propylene refrigerant 换热器单元,设计用于单独使用或作为系统的一部分使用,重量超过63.5公吨,不适用于使用丙烯制冷剂的冷冻MCB冷却器
8419.50.5000 Heat exchangers, each valued not over $17,000 热交换器,每个价值不超过17,000美元
8419.50.5000 Industrial tubular heat exchange units 工业管式换热装置
8419.90.3000 Heat exchanger plates, cores, finned tubes, cones, shells, bonnets, flanges and baffles 换热器板,芯,翅片管,锥体,壳体,阀盖,法兰和挡板
8420.10.9040 Calendering machines other than for metals or glass, such machines each weighing more than 12,000 kg 除金属或玻璃以外的压光机,每台重量超过12,000千克的机器
8421.21.0000 Glass water filtration pitchers and filters 玻璃水过滤投手和过滤器
8421.21.0000 Household alkaline water ionizer and filtration apparatus 家用碱性水电离器和过滤装置
8421.21.0000 Household water filter cartridges 家用滤水器滤芯
8421.21.0000 Water filters for pet water fountains 宠物喷泉的水过滤器
8421.29.0065 Accumulators for heat pumps and air conditioners, valued over $8 but not over $12 each 热泵和空调蓄电池,价值超过8美元但不超过12美元
8421.29.0065 Basket, Y-type or duplex strainers, each having a threaded or flanged-style end 篮式,Y型或双层过滤器,每个都带有螺纹或法兰式端部
8421.29.0065 Cage-type cartridges, designed to remove water directly from fuel tanks, valued not over $2 each 笼式滤芯设计用于直接从油箱中取出水,价值不超过2美元
8421.29.0065 Filtering or purifying machinery valued over $2,500,000 过滤或净化价值超过2,500,000美元的机器
8421.29.0065 Hydraulic fluid filters, rated at less than 100 kPa, measuring no more than 10 cm in diameter and 12 cm in length, each valued not more than $2 液压油滤清器,额定值小于100 kPa,直径不超过10厘米,长度不超过12厘米,每个价值不超过2美元
8421.29.0065 Polymer filtration systems of a kind used to separate solid contaminants from liquid polymers, each valued over $30,000 but not over $40,000 用于从液体聚合物中分离固体污染物的聚合物过滤系统,每个价值超过30,000美元但不超过40,000美元
8421.29.0065 Receiver-driers for air conditioning units used in commercial vehicles 用于商用车辆的空调机组的接收器 - 干燥器
8421.29.0065 Stainless steel mesh filters with plastic cores, of a kind used for preventing clogs in paint sprayers, each valued not over $1.50 带塑料芯的不锈钢网过滤器,用于防止喷漆器堵塞,每种价值不超过1.50美元
8421.99.0040 Fiberglass-reinforced polyethylene pressure vessels 玻璃纤维增​​强聚乙烯压力容器
8421.99.0040 Parts of filters, each valued not over $8 过滤器的一部分,每个价值不超过8美元
8421.99.0040 Self-cleaning filters, of stainless steel, of a kind suitable for use in filtering municipal, agricultural or industrial water supplies, valued over $700 but not over $800 each 自洁式过滤器,不锈钢,适用于过滤市政,农业或工业用水,价值超过700美元但不超过800美元
8421.99.0040 Swimming pool filter cartridges 游泳池滤芯
8421.99.0080 Paint sprayer filters of paper, with steel mesh casings and plastic end caps, valued not over $1 each 喷漆纸过滤器,带钢网壳和塑料端盖,每个价值不超过1美元
8421.99.0080 Parts of vortex gas separators 涡流气体分离器的部件
8422.30.9191 Vacuum sealing machines, each valued over $30 but not over $40 真空封口机,每个价值超过30美元但不超过40美元
8422.90.0640 Stamped outer door panels of stainless steel for household dishwashing machines 用于家用洗碗机的不锈钢冲压外门板
8423.20.1000 Electronic scales for continuous weighing of quartz, powder and resin on conveyors, capable of measuring 2 kg or more but not exceeding100 kg of materials per minute 用于在输送机上连续称重石英,粉末和树脂的电子秤,每分钟可测量2千克或更多但不超过100千克的材料
8425.39.0100 Winches, each having a steel frame with a ratchet and pawl mechanism, operated manually 每个绞盘都有一个带棘轮和棘爪机构的钢架,可手动操作
8427.10.8010 2019.07.01前
8427.10.8030 2019.07.01后
Electric operator-riding pallet trucks, each with a load capacity not exceeding 3,700 kg 电动操作的托盘搬运车,每个载重量不超过3,700千克
8427.10.8010 2019.07.01前
8427.10.8030 2019.07.01后
Electric operator-riding reach-type fork-lift trucks, each with a load capacity exceeding 1,300 kg but not exceeding 2,100 kg 电动操作员伸展式叉车,每个载重量超过1,300千克但不超过2,100千克
8427.20.4000 Rider-type, counterbalanced fork-lift trucks, each powered by an internal combustion engine, with pneumatic tires, having a load capacity of 900 kg or more but not exceeding 18,000 kg 骑乘式平衡重式叉车,每辆由内燃机提供动力,配有充气轮胎,负载能力为900千克或以上但不超过18,000千克
8427.20.4000 Rider-type, counterbalanced fork-lift trucks, each powered by an internal combustion engine, with solid tires, having a load capacity of 1,300 kg or more but not exceeding 3,000 kg 骑乘式平衡重式叉车,每个由内燃机提供动力,带有实心轮胎,载重量为1,300千克或以上但不超过3,000千克
8431.39.0010 Baggage carriers, of polyethylene, suitable for use solely or principally with conveyers of subheading 8428.39 聚乙烯行李架,仅适用于或主要用于8428.39小标题的传送带
8428.39.0000 Continuous action elevators and conveyors of the kind designed for use in airports for handling baggage 连续动作电梯和设计用于机场处理行李的输送机
8428.39.0000 Roller conveyors with pallet rotators or pallet corner rotators 带托盘旋转器或托盘转角旋转器的滚筒输送机
8428.90.0290 Rotary positioning machines for use with machine tools 用于机床的旋转定位机
8431.10.0090 Winch handles 绞盘手柄
8431.20.0000 Parts suitable for use solely or principally with self-propelled works trucks powered by an electric motor and fitted with lifting or handling equipment of subheading 8427.10 适用于单独或主要用于由电动机驱动的自行式工程车并配有副标题8427.10的起重或搬运设备的零件
8431.39.0010 Drive frames weighing over 3.6 metric tons and parts thereof 重量超过3.6公吨的驱动框架及其部件
8431.41.0040 Grappler attachments, other than buckets, each valued over $250 but not over $350 Grappler附件,除了水桶,每个价值超过250美元但不超过350美元
8431.41.0040 Grappler buckets, each valued over $800 but not over $900 Grappler水桶,每个价值超过800美元但不超过900美元
8431.43.8060 Bridge plug assemblies for oil and gas boring or sinking machinery, other than for offshore oil and natural gas drilling and production platforms 用于石油和天然气钻探或沉没机械的桥塞组件,用于海上石油和天然气钻井和生产平台
8431.49.9020 Metal frames or assemblies of a kind suitable for use as attachments to agricultural tractors 适合用作农用拖拉机附件的金属框架或组件
8431.49.9095 Counterweight castings of iron or steel designed for use on excavators and wheel loaders 设计用于挖掘机和轮式装载机的铁或钢配重铸件
8431.20.0000 Counterweight castings of iron or steel, designed for use on skid loaders 铁或钢的配重铸件,设计用于滑移装载机
8431.49.9095 Dredge cutter teeth, comprising parts suitable for use solely or principally with the machinery of heading 8429 or 8430 疏浚刀齿,包括适合单独或主要用于航向8429或8430的机械的零件
8432.90.0050 Parts of harrows or cultivators incorporating bearings 包含轴承的耙或耕耘机的部件
8432.90.0060 Ductile iron casting, weighing more than 0.75 kg but not more than 18.25 kg, with a maximum dimension exceeding 190 mm but not exceeding 695 mm 球墨铸铁,重量超过0.75千克但不超过18.25千克,最大尺寸超过190毫米但不超过695毫米
8436.10.0000 Electrically powered granulator machine 电动造粒机
8441.40.0000 Machines, of a kind used to produce cylindrical paper drinking straws 用于生产圆柱形纸吸管的机器
8443.99.2050 Paper handling assemblies as described in Additional U.S. note 2(g) to chapter 84 如第84章附加的美国注释2(g)所述的纸张处理组件
8454.30.0010 Cold-chamber die casting machines having a maximum casting volume of 52.78 m3, a die height of 0.4 m or more but not exceeding 1 m, and a maximum die locking force of 8,400 kN 冷室压铸机最大铸造量为52.78 m3,模具高度为0.4 m或更大但不超过1 m,最大锁模力为8,400 kN
8455.90.8000 Cylindrical side guides, the foregoing comprising parts of metal-rolling mills 圆柱形侧导轨,前述包括金属轧机的部件
8459.10.0000 Way-type unit head machine tools, each valued over $1,800 but not over $2,200 Way-type单元头机床,每台价值超过1,800美元但不超过2,200美元
8459.69.0020 Benchtop milling machines, not numerically controlled, valued over $400 but not over $700 each 台式铣床,不受数字控制,价值超过400美元但不超过700美元
8462.91.8090 Hydraulic presses, not numerically controlled, each valued over $85,000 but not over $110,000 液压机,不受数字控制,每个价值超过85,000美元,但不超过11​​0,000美元
8462.91.8090 Machines for end-forming metal pipes, such pipes ranging in outside diameter from 60 cm or more but not exceeding 305 cm 用于端部成形金属管的机器,例如外径为60cm或更大但不超过305cm的管
8465.92.0051 Woodworking routers, each with a 1,306 W (1-3/4 horsepower) motor and valued not over $60 木工路由器,每台都配备1,306 W(1-3 / 4马力)电机,价值不超过60美元
8465.99.0220 Woodworking lathes, each with a motor of 224 watts (0.3 horsepower) or more but not exceeding 896 W (1.2 horsepower), the foregoing which operate at speeds of 600 to 3,500 rpm, valued not over $130 each 木工车床,每台车的功率为224瓦(0.3马力)或更高,但不超过896瓦(1.2马力),前者的运行速度为600至3,500转,价值不超过130美元
8466.30.8000 Machine tool stands having leveling, stabilizing, attachment or other special features 机床支架具有调平,稳定,附件或其他特殊功能
8466.92.5010 Work stands designed for use with miter saws, whether or not wheeled 工作台设计用于斜切锯,无论是否带轮
8467.11.1040 Rotary grinders for working in the hand, suitable for metal working, each valued under $10 旋转式研磨机,适合在手工作,适合金属加工,每个价值低于10美元
8467.11.1040 Rotary sanders for working in the hand, suitable for metal working, each valued under $20 手动旋转砂光机,适合金属加工,每个价值不到20美元
8467.11.1080 Pneumatic rotary cutters, suitable for metal working, each with a maximum blade diameter of 11 cm and a maximum speed of 20,000 rpm, valued under $10 each 气动旋转切割机,适用于金属加工,每个刀片最大刀片直径为11厘米,最大速度为20,000转/分,每个价值不到10美元
8471.70.9000 External optical disk drive storage units enclosed in cases, each valued under $60 外壳装有外置光盘驱动器存储单元,每个价值低于60美元
8473.40.8600 Parts of automatic teller machines 自动柜员机的零件
8474.10.0090 Stationary sand screening equipment having more than 90 but less than 182 metric ton per hour capacity 固定式砂筛设备,每小时容量超过90公吨但小于182公吨
8474.31.0000 Portable concrete or mortar mixers, electrically powered, with a capacity not exceeding 0.15 m3 便携式混凝土或砂浆搅拌机,电动,容量不超过0.15立方米
8474.80.0015 Mineral pressing machine equipped with vibration motors 矿物压制机配有振动电机
8477.80.0000 Electrically powered cutting machines for working supple plastics, valued not over $300 per unit 用于加工柔软塑料的电动切割机,每件单价不超过300美元
8477.90.8501 Injection mold inserts 注塑模具插件
8477.90.8501 Mold base parts, each with a length of more than 19 cm but not more than 91 cm, a width of more than 3 cm but not more than 61 cm and a thickness of more than 2 cm but not more than 16 cm; the foregoing preconfigured with standard mill features such as drilled holes, slots and bushings to accommodate the various pins and tube dowels necessary for the functioning of the plastic injection mold 模具基部,每个长度大于19厘米但不大于91厘米,宽度大于3厘米但不大于61厘米,厚度大于2厘米但不大于16厘米;上述预先配置了标准的轧机特征,如钻孔,槽和衬套,以适应塑料注塑模具运行所需的各种销和管销
8477.90.8540 Sidewall plates, top bead rings, bottom bead rings and upper bag clamp rings, of steel, all the foregoing being parts of tire molds 侧壁板,顶部胎圈环,底部胎圈环和上部袋夹环由钢制成,所有前述部件都是轮胎模具的一部分
8479.82.0040 Machines of a kind suitable for mixing granules of rock or similar hard materials with plastic resin to form a homogenous mixture 适用于将岩石或类似硬质材料的颗粒与塑料树脂混合以形成均匀混合物的机器
8479.82.0080 Machines for crushing/grinding pills, each valued over $20 but not over $35 破碎/研磨药丸的机器,每个价值超过20美元但不超过35美元
8479.89.9499 Granulating machines not specifically designated for use with specific particulate materials, each valued more than $25,000 未特别指定用于特定颗粒材料的造粒机,每台价值超过25,000美元
8479.89.9499 Vertical or single shaft shredding machines of a kind suitable for use in the recycling industry, weighing over 10,000 kg but not over 15,000 kg each 适用于回收行业的垂直或单轴切碎​​机,重量超过10,000 kg但不超过15,000 kg
8479.90.9496 Parts of drain and sewer cleaning machines 排水和下水道清洁机的部件
8479.90.9496 Parts of suspension arms of a kind used in dental lighting or delivery systems 用于牙科照明或输送系统的一种悬架臂部件
8480.20.0000 Mold bases, of steel, measuring 27.9 cm by 38.1 cm by 45.7 cm, each weighing 409.1 kg 钢模架,尺寸为27.9厘米×38.1厘米×45.7厘米,每块重409.1千克
8480.30.0000 Plastic injection molding patterns each valued over $50,000 塑料注塑成型,每个价值超过50,000美元
8480.71.8060 Compression type tire molds 压缩式轮胎模具
8481.20.0020 Hydraulic solenoid timing valve each valued not over $20 液压电磁阀定时阀每个价值不超过20美元
8481.30.9000 Check valves, of plastics or rubber 止回阀,塑料或橡胶
8481.90.9085 Valve pressure relief components, including body covers, and diaphragms 阀门泄压组件,包括阀体盖和隔膜
8482.10.5004 Unground ball bearings each valued not over $4 未磨损的滚珠轴承每个价值不超过4美元
8482.10.5008 Thrust bearings each valued not over $2 每个价值不超过2美元的推力轴承
8482.10.5016 Wheel hub bearing units, of steel, of a kind used on motor vehicles, trailers and lawn equipment, each having one flange for the wheel and brake attachment and a second flange for attaching to the vehicle suspension, and having a sealed and lubricated double row of bearings 用于机动车辆,拖车和草坪设备的钢轮毂轴承单元,每个都具有一个用于车轮和制动器附件的法兰,以及用于连接到车辆悬架的第二法兰,并具有密封和润滑的双排轴承
8482.10.5028 Single row angular contact ball bearings, other than wheel hub bearing units, valued over $5.50 but not over $6.25 each 单轮角接触球轴承,除轮毂轴承单元外,价值超过5.50美元但不超过6.25美元
8482.10.5036 Single row radial bearings, with an outside diameter less than 9 mm, each valued not over $1 单列径向轴承,外径小于9 mm,每个价值不超过1美元
8482.10.5056 Single row radial bearings, with an outside diameter over 100 mm, each valued not over $9 单列径向轴承,外径超过100毫米,每个价值不超过9美元
8482.10.5060 Radial double row ball bearings, having an inner diameter of 10 mm or greater but not exceeding 90 mm, an outside diameter of 30 mm or greater but not exceeding 170 mm, and a width of 14.3 mm or greater but not exceeding 68.3 mm, with a cage of steel or plastics 径向双列球轴承,内径10毫米或以上但不超过90毫米,外径30毫米或以上但不超过170毫米,宽度14.3毫米或以上但不超过68.3毫米,一个钢或塑料笼
8482.20.0061 Tapered roller bearings, with cups having an outside diameter exceeding 102 mm but not exceeding 203 mm, each valued not over $9 圆锥滚子轴承,外径超过102毫米但不超过203毫米,每个价值不超过9美元
8482.20.0070 Single row tapered roller bearing cone assemblies for cups having an outside diameter not exceeding 102 mm 用于外径不超过102 mm的杯子的单列圆锥滚子轴承锥组件
8482.20.0081 Steel tapered roller bearing cone assemblies, entered without cups, with an inner race that extends beyond the width of the roller cage, for cups having an outside diameter exceeding 102 mm but not exceeding 203 mm 钢制圆锥滚子轴承锥组件,不带杯子进入,内圈延伸超过滚子保持架的宽度,适用于外径超过102 mm但不超过203 mm的杯子
8482.20.0081 Tapered roller bearing cone assemblies, each valued not over $9, for cups having an outside diameter exceeding 102 mm but not exceeding 203 mm 圆锥滚子轴承锥组件,每个价值不超过9美元,用于外径超过102毫米但不超过203毫米的杯子
8482.20.0090 Single row tapered roller bearing cone assemblies for cups having an outside diameter exceeding 203 mm 用于外径超过203 mm的杯子的单列圆锥滚子轴承锥组件
8482.30.0080 Spherical roller bearings, other than single row, with an inside diameter of 20 mm or greater but not exceeding 300 mm, an outside diameter of 50 or greater but not exceeding 300 mm, and a width of 15 mm or greater but not exceeding 100 mm 球面滚子轴承,单列以外,内径20毫米或以上但不超过300毫米,外径50或以上但不超过300毫米,宽度15毫米或以上但不超过100毫米
8482.50.0000 Cylindrical roller thrust bearings, each having an inside diameter of 77.2 mm, an outer diameter of 95.6 mm, and a width of 3.445 mm, comprising 64 cylindrical rollers measuring 2.24 mm in diameter and 5 mm in length, a steel cage and a steel axial washer 圆柱滚子推力轴承,每个内径为77.2 mm,外径为95.6 mm,宽度为3.445 mm,包括64个直径为2.24 mm,长度为5 mm的圆柱滚子,钢保持架和钢轴垫圈
8482.99.6510 Adapter sleeve assemblies for spherical roller bearings consisting of a tapered sleeve adapter, a locknut and lock washer 用于球面滚子轴承的紧定套组件包括锥形套筒适配器,锁紧螺母和锁紧垫圈
8483.50.6000 Flywheels of a kind used in manual automotive transmission 用于手动汽车变速器的一种飞轮
8483.60.4080 Universal joints, each weighing not more than 5 kg 万向节,每个重量不超过5公斤
8483.90.1010 Chain sprockets with forged hubs, the foregoing with outer diameter of 59.4 mm or greater but not exceeding 999.4 mm and width of 22.4 mm or greater but not exceeding114.3 mm 带有锻造轮毂的链轮,前述外径为59.4 mm或更大但不超过999.4 mm,宽度为22.4 mm或更大但不超过11​​4.3 mm
8483.90.1050 Chain sprockets, each not more than 55 mm in diameter 链轮链轮,每个直径不超过55毫米
8484.10.0000 Gaskets of metal sheeting combined with other material or of two or more layers of metal, each of the foregoing valued not over $3 金属板的垫圈与其他材料或两层或更多层金属相结合,每个金属板的价值不超过3美元
8487.90.0080 Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features, and not specified or included elsewhere in chapter 84, each valued not over $20 机械部件,不包含电气连接器,绝缘体,线圈,触点或其他电气特征,未在第84章的其他地方指明或包括在内,每个价值不超过20美元
8501.10.4020 Electric motors, AC, permanent split capacitor type, not exceeding 16 W 电动机,AC,永久分离电容器,不超过16 W.
8501.10.4020 Electric motors, AC, permanent split capacitor type, with a height of 97.5 mm or more but not exceeding 127.0 mm and a length of 82.8 mm or more but not exceeding 226.0 mm, with an output of 8.9 kW or more but not exceeding 12 kW, 60 hertz 电动机,交流电,永久分离电容器型,高度97.5毫米或以上但不超过127.0毫米,长度82.8毫米或以上但不超过226.0毫米,输出功率为8.9千瓦或以上但不超过12千瓦,60赫兹
8501.10.4020 Shaded-pole AC motors, of an output not exceeding 18.65 W, each valued not over $5 输入功率不超过18.65 W的罩极交流电机,每个价值不超过5美元
8501.10.4040 Brushless motors, of an output not exceeding 18.65 W, not synchrous, each valued not over $0.50 无刷电机,输出功率不超过18.65 W,不同步,每个价值不超过0.50美元
8501.10.4060 DC servo motors or actuators, of an output of under 18.65 W, valued over $2 but not over $2.50 each 直流伺服电机或执行器,输出功率低于18.65 W,价值超过2美元但不超过2.50美元
8501.20.2000 Universal AC/DC motors, each rated at more than 37.5 W but not more than 65 W and valued at less than $20 通用AC / DC电机,每个额定功率超过37.5 W但不超过65 W,价值低于20美元
8501.20.6000 Quarter-turn actuator motors, of an output exceeding 746 W, each valued not over $140 角行程执行器电机,输出功率超过746 W,每个价值不超过140美元
8501.31.2000 DC motors, brushless, of an output rated at 48 W or greater but not exceeding 60 W, each valued not over $14 直流电动机,无刷,额定功率为48 W或更高但不超过60 W的输出,每个价值不超过14美元
8501.31.2000 DC motors, brushless, rated at 32 V, designed to operate in saltwater environment, each valued over $35 直流电机,无刷,额定电压为32 V,设计用于盐水环境,每个价值超过35美元
8501.31.2000 DC motors, of an output exceeding 37.5 W but not exceeding 74.6 W, each incorporating a thermal switch, the foregoing valued not over $22 直流电机,输出功率超过37.5 W但不超过74.6 W,每个都带有一个热敏开关,前面价值不超过22美元
8501.51.4040 AC motors, multiphase, of a kind used with paint sprayers to regulate the flow of paint, of an output exceeding 74.6 W but not exceeding 735 W, valued not over $200 each 交流电动机,多相,与油漆喷雾器一起使用,用于调节油漆流量,输出功率超过74.6 W但不超过735 W,每个价值不超过200美元
8501.31.6000 Brushless, variable speed, DC motors, of an output of 750 W 无刷,可变速,直流电机,输出功率750 W
8501.31.6000 DC motor and gear box assemblies, of an output of 746 W or more but not exceeding 750W, of a kind used to open and close a swing door, the foregoing valued not over $300 each 用于打开和关闭旋转门的直流电机和齿轮箱组件,输出功率为746 W或更高但不超过750 W,前者价值不超过300美元
8501.51.2040 AC motors, multi-phase, of an output exceeding 37.5 W but not exceeding 74.6 W, other than gear motors, each weighing less than 600 grams and valued less than $15 交流电机,多相,输出功率超过37.5 W但不超过74.6 W,除齿轮电机外,每个重量不超过600克,价值低于15美元
8501.51.4040 AC motors, multi-phase, of an output exceeding 37.5 W but not exceeding 74.6 W, each fitted with a timing belt 交流电动机,多相,输出功率超过37.5 W但不超过74.6 W,每个都配有同步带
8501.52.8040 AC motors, multiphase, of an output exceeding 74 kW but not exceeding 75 kW, other than for use in civil aircraft 交流电动机,多相,输出功率超过74千瓦但不超过75千瓦,不适用于民用飞机
8501.53.4080 AC motors, multi-phase, of an output exceeding 93 kW but not exceeding 112 kW 交流电动机,多相,输出功率超过93 kW但不超过11​​2 kW
8501.63.0000 AC generators, each having copper windings and weighing more than 900 kg but not more than 1700 kg 交流发电机,每个都有铜绕组,重量超过900千克但不超过1700千克
8501.64.0025 AC generators, of an output exceeding 750 kVA but not exceeding 10,000 kVA, each having copper windings and weighing more than 1650 kg but not more than 4100 kg, other than for wind-powered generating sets classified within 8502.31.00 输出功率超过750 kVA但不超过10,000 kVA的交流发电机,每个都有铜绕组,重量超过1650千克但不超过41千千克,不包括8502.31.00以内的风力发电机组
8502.11.0000 Generator sets each weighing more than 650 kg but not over 830 kg 发电机组每个重量超过650千克但不超过830千克
8503.00.6500 Armatures, other than for motors of under 18.65 W, other than for generators for civil aircraft, each valued not over $5 除了用于民用飞机发电机的18.65 W以下电动机以外的电枢,每个价值不超过5美元
8503.00.6500 Motor field cores, other than for motors of under 18.65 W, other than for generators for civil aircraft, of steel stamping, each valued not over $5 除了用于民用飞机发电机之外的18.65 W以下电机的电动机磁芯,钢冲压,每个价值不超过5美元
8503.00.6500 Stators and rotors designed for use with household laundry washing machines or tabletop household appliances, each valued not over $10 设计用于家用洗衣机或桌面家用电器的定子和转子,每个价值不超过10美元
8503.00.6500 Stators and rotors, 2 or 4 pole type, valued over $4,700 but not over $4,900 each 定子和转子,2或4极型,价值超过4,700美元但不超过4,900美元
8504.32.0000 Electrical transformers, each weighing not over 500 grams 电力变压器,每个重量不超过500克
8504.90.6500 Printed circuit boards, each measuring no more than 2.3 cm by 13.1 cm, presented with two black plastic pin connectors on opposite ends and/or sides, designed for use in transformers used to provide power to telecommunications networks 印刷电路板,每个尺寸不超过2.3厘米×13.1厘米,在相对的两端和/或两侧设有两个黑色塑料针式连接器,设计用于为电信网络提供电源的变压器
8504.90.9646 Coils for cast epoxy resin transformers, each of the foregoing valued over $6,500 but not over $7,000 用于铸造环氧树脂变压器的线圈,上述每个价值超过6,500美元但不超过7,000美元
8504.90.9690 Conductors of aluminum for electric transformers, static converters and inductors 用于电力变压器,静态变流器和电感器的铝导体
8504.90.9690 Heat sinks of aluminum for electric transformers, static converters and inductors 于电力变压器,静态变流器和电感器的铝散热片
8504.90.9690 Inductor parts, of plastics 塑料的电感器部件
8504.90.9690 Toroids of silicon steel 硅钢环形
8506.50.0000 Lithium primary batteries valued over $0.50 but not over $0.75 each 锂原电池价值超过0.50美元但不超过0.75美元
8514.10.0000 Resistance-heated annealing ovens 电阻加热退火炉
8514.10.0000 Resistance-heated glass furnaces, each with continuous conveyance articulating roller and positive press 电阻加热的玻璃熔炉,每个都有连续的输送铰接辊和正压机
8514.40.0000 Resistance-heated strip casting furnaces 电阻加热带钢铸造炉
8515.11.0000 Manually operated soldering irons and guns, with or without their power supplies but without work stands or other accessory devices 手动操作的烙铁和枪,有或没有电源,但没有工作台或其他附件设备
8515.90.2000 Tungsten electrodes for tungsten inert gas arc welding torches 用于钨极惰性气体保护焊的钨电极
8526.91.0040 GPS apparatus measuring not over 118 mm in height, 120 mm in width and 20 mm in thickness, presented with or without attached antenna or other accessories GPS设备的高度不超过11​​8毫米,宽度为120毫米,厚度为20毫米,带有或不带有天线或其他附件
8526.91.0040 GPS apparatus suitable for use with dog or other animal collars GPS装置适用于狗或其他动物项圈
8526.91.0040 Kits each consisting of GPS apparatus suitable for use with dog or animal collars, a hand-held GPS transmitter and accessories therefor 每个套件包括适用于狗或动物项圈的GPS装置,手持GPS发射器及其配件
8526.92.5000 Radio remote control apparatus of a kind suitable for controlling gas burning fireplaces 一种适用于控制燃气壁炉的无线电遥控装置
8529.10.4040 27 MHz radio remote control antennas each of a kind designed to transmit a signal to a dog collar receiver 27 MHz无线电遥控天线,每种都设计用于向狗项圈接收器发送信号
8529.10.9100 CB radio antennas CB无线电天线
8532.22.0055 Aluminum electrolytic capacitors each valued not over $1.50 铝电解电容器每个价值不超过1.50美元
8532.24.0020 Fixed ceramic dielectric multilayer chip capacitors, each valued not over $0.12 per unit 固定陶瓷电介质多层芯片电容器,每个单元的价值不超过0.12美元
8532.25.0010 Dielectric capacitors of paper or plastics, for AC service, operating at less than 300 V each valued not over $4.50 用于交流电的纸质或塑料电介质电容器,每个电压低于300 V,价值不超过4.50美元
8532.25.0020 Dielectric capacitors of paper or plastics, for AC service, operating at 300 V or more but not exceeding 600 V, each valued not over $3 用于交流电的纸或塑料电介质电容器,工作电压为300 V或以上但不超过600 V,每个电容器的价值不超过3美元
8532.25.0080 Double-sided capacitor modules, each containing capacitors operating at 165 farad, 48 V, and 53 watt-hours 双面电容器模块,每个电容器模块包含165法拉,48伏和53瓦时的电容器
8532.29.0040 Fixed capacitors (the foregoing other than tantalum, aluminum electrolytic, ceramic dielectric, dielectrics of paper or plastics or mica dielectric), each valued over $200 but not over $300 固定电容器(上述除钽,铝电解电容,陶瓷电介质,纸或塑料或云母电介质的电介质),每个价值超过200美元但不超过300美元
8532.30.0090 Variable capacitors (other than mica, ceramic or glass dielectric), each valued over $500 but not over $600 可变电容器(云母,陶瓷或玻璃电介质除外),每个价值超过500美元但不超过600美元
8533.40.4000 Metal oxide varistors of ceramic metal oxide materials 陶瓷金属氧化物材料的金属氧化物压敏电阻
8533.40.8070 Potentiometers (other than cermet or metal glaze), each valued not over $70 电位计(金属陶瓷或金属釉除外),每个价值不超过70美元
8533.40.8070 Thermistors (other than cermet or metal glaze), each valued not over $1 热敏电阻(金属陶瓷或金属釉除外),每个价值不超过1美元
8536.30.4000 Motor overload protectors for a voltage exceeding 60 V but not exceeding 1,000 V, each valued over $5 but not over $7 电机过载保护器,电压超过60 V但不超过1,000 V,每个价值超过5美元但不超过7美元
8536.49.0065 Contactors for a voltage not exceeding 1,000 V, each valued not over $18 接触器的电压不超过1,000 V,每个值不超过18美元
8536.50.4000 Motor starters for a voltage exceeding 60 V but not exceeding 1,000 V, valued over $9 but not over $10 each 电动机启动器的电压超过60 V但不超过1,000 V,价值超过9美元但不超过10美元
8536.50.9020 Rotary switch assemblies, for a voltage not exceeding 1,000 V, rated at not over 5 A, each valued over $2 but not over $3 旋转开关组件,电压不超过1,000 V,额定值不超过5 A,每个价值超过2美元但不超过3美元
8536.50.9040 Snap-action switches, for a voltage not exceeding 250 V, rated not over 8 A 快动开关,电压不超过250 V,额定值不超过8 A.
8536.50.9065 Broken belt switches, for a voltage not exceeding 1,000 V, designed for use in clothes dryers 断开的皮带开关,电压不超过1,000 V,设计用于干衣机
8536.50.9065 Single-pole, double-throw switches, for a voltage not exceeding 100 V, each with a movable contact arm permitting the opening and closing of contact points 单刀双掷开关,电压不超过100 V,每个都带有可动接触臂,可以打开和关闭接触点
8536.69.4020 Cylindrical multicontact connectors, for a voltage not exceeding 1,000 V, each valued not over $120 圆柱形多触点连接器,电压不超过1,000 V,每个值不超过120美元
8536.69.4040 Printed circuit connectors each valued not over $1 印刷电路连接器每个价值不超过1美元
8536.69.4040 Printed circuit connectors, for a voltage not exceeding 1,000 V, measuring 142 mm long, 20.53 mm high and 6.5 mm wide 印刷电路连接器,电压不超过1,000 V,长142 mm,高20.53 mm,宽6.5 mm
8536.69.4040 Printed circuit connectors, for a voltage not exceeding 1,000 V, measuring 59.08 mm long, 25.91 mm high and 25.91 mm wide, each valued not over $20 印刷电路连接器,电压不超过1,000 V,长59.08 mm,高25.91 mm,宽25.91 mm,每个价值不超过20美元
8536.69.4040 Printed circuit connectors, for a voltage not exceeding 1,000 V, each valued over $1 but not over $5 印刷电路连接器,电压不超过1,000 V,每个价值超过1美元但不超过5美元
8536.69.4040 Printed circuit connectors, for a voltage not exceeding 1,000 V, stacked, each valued not over $10 印刷电路连接器,堆叠电压不超过1,000 V,每个价值不超过10美元
8536.90.4000 Kits each containing 40 assorted terminals comprising 12 butt splices, 10 ring terminals, 8 spade terminals and 10 female disconnects, for a voltage not exceeding 1,000 V 每个套件包含40个各种端子,包括12个对接接头,10个环形端子,8个铲形端子和10个母接头,电压不超过1,000 V
8536.90.4000 Kits each containing 80 assorted terminals, valued not over $2, for a voltage not exceeding 1,000 V 每个包含80个各种终端的套件,价值不超过2美元,电压不超过1,000 V.
8536.90.8530 Junction boxes, each valued over $1.40 but not over $1.70 接线盒,每个价值超过1.40美元但不超过1.70美元
8541.21.0075 Transistors, with a dissipation rate of less than 1 W and an operating frequency of not less than 100 MHz, valued over $0.04 but not over $0.05 each 晶体管的耗散率小于1 W,工作频率不低于100 MHz,价值超过0.04美元但不超过0.05美元
8541.21.0095 Bipolar junction transistors, with a dissipation rate of less than 1 W and with an operating frequency of less than 100 MHz 双极结型晶体管,耗散率小于1 W,工作频率小于100 MHz
8541.29.0095 Metal-oxide transistors on a silicon-carbide substrate, with a dissipation rate of less than 1 W and an operating frequency of less than 100 MHz 碳化硅衬底上的金属氧化物晶体管,其耗散率小于1W,工作频率小于100MHz
8541.60.0060 Mounted quartz piezoelectric crystals operating at a supply voltage of 1.5 V or greater but not exceeding 3.75 V and a frequency range not over 175 MHz 安装的石英压电晶体,工作电源电压为1.5 V或更高但不超过3.75 V,频率范围不超过175 MHz
8543.30.2000 Copper panel or pattern electroplating machines of a kind used solely or principally for the manufacture of printed circuits 铜板或图案电镀机,单独使用或主要用于制造印刷电路
8543.30.2000 Electrolysis copper etchback and desmear machines of a kind used solely or principally for the manufacture of printed circuits 电解铜回蚀和去污机,仅用于或主要用于制造印刷电路
8544.30.0000 Coaxial antenna feeder cables designed for use in motor vehicles 同轴天线馈电电缆设计用于机动车辆
8544.30.0000 Ignition coil and wiring sets designed for use with motor vehicle engines, each valued not over $7 设计用于机动车发动机的点火线圈和线束,每个价值不超过7美元
8544.30.0000 Power supply cables designed for use in aircraft 设计用于飞机的电源线
8544.30.0000 Wiring sets designed for use with motor vehicle gear shifters, each valued not over $7 设计用于机动车变速器的接线组,每个价值不超过7美元
8544.49.9000 Insulated aluminum cables, not fitted with connectors, for a voltage exceeding 80 V but not exceeding 600 V 绝缘铝电缆,未安装连接器,电压超过80 V但不超过600 V.
8803.30.0030 Gearhead assemblies, and parts thereof, for use in civil aircraft, each valued not over $40 用于民用飞机的减速机组件及其零件,每个价值不超过40美元
8803.90.9060 Wing, tail, fuselage and other body sections, including structural components and parts of the foregoing, designed for use on drone aircraft not capable of transporting persons 机翼,尾翼,机身和其他车身部分,包括上述结构部件和部件,设计用于无法运输人员的无人驾驶飞机
9002.90.9500 Motor vehicle lens cover assemblies 机动车镜头盖组件
9011.90.0000 Accessories designed for compound optical microscope stages 为复合光学显微镜平台设计的附件
9011.90.0000 Camera adapter mounts designed for compound optical microscopes 专为复合光学显微镜设计的相机适配器安装座
9011.90.0000 Episcopic fluorescence microscopy accessories designed for compound optical microscopes 用于复合光学显微镜的Episcopic荧光显微镜配件
9013.20.0000 Lasers, other than laser diodes, each valued over $200 but not over $300 激光二极管以外的激光器价值超过200美元但不超过300美元
9013.80.7000 Liquid-crystal displays, each measuring not over 85 cm in diagonal measurement 液晶显示器,每个测量对角线测量不超过85厘米
9014.90.6000 Parts, of plastics, of fish finders of subheading 9014.80.20 塑料零件,副标题9014.80.20的鱼探仪
9022.90.6000 Tungsten shielding, containing 90% or more of tungsten, of a kind designed to be attached to the walls of the multileaf collimator of the specific radiotherapy apparatus based on the use of X-rays 含有90%或更多钨的钨屏蔽,设计用于基于X射线的使用附着到特定放射治疗设备的多叶准直器的壁上
9026.10.2040 Electromagnetic flow meter systems for pipes with outside diameters larger than 183 cm 外径大于183厘米的管道用电磁流量计系统
9026.20.4000 Digital tire pressure gauges, each valued not over $2 数字轮胎压力表,每个价值不超过2美元
9027.90.5910 Carbon monoxide sensors, each having a value exceeding $14 but not exceeding $19 一氧化碳传感器,每个传感器价值超过14美元但不超过19美元
9027.90.5910 Hydrogen sulfide sensors, each having a value exceeding $9 but not exceeding $13 硫化氢传感器,每个传感器的价值超过9美元但不超过13美元
9027.90.5910 Nitrogen dioxide sensors, each having a value exceeding $12 but not exceeding $17 二氧化氮传感器,每个传感器的价值超过12美元但不超过17美元
9027.90.5910 Sulfur dioxide sensors, each having a value exceeding $24 but not exceeding $29 二氧化硫传感器,每个传感器价值超过24美元但不超过29美元
9027.90.5995 Microtome universal cassette clamps 切片机通用盒式夹具
9028.90.0040 Utility meter bases, of plastics, each 17 cm or greater but not exceeding 18 in diameter, incorporating a latching relay, the foregoing valued over $8 but not over $10 塑料电表基座,每个直径17厘米或更大但不超过18英寸,带有自锁继电器,上述价值超过8美元但不超过10美元
9030.40.0000 Waveform monitors, each valued over $4,000 but not over $5,000 波形监视器,每个价值超过4,000美元但不超过5,000美元
9030.90.2500 Printed circuit board assemblies designed for use with X-ray detectors 设计用于X射线探测器的印刷电路板组件
9030.90.8911 Oscilloscope probes 示波器探头
9032.10.0060 Thermostats for air conditioning, refrigeration or heating systems, designed for use in motor vehicles 用于空调,制冷或加热系统的恒温器,设计用于机动车辆
9032.10.0060 Thermostats for air conditioning, refrigeration or heating systems, other than for wall mounting, each measuring not more than 15 cm in length, 11 cm in width, and 3 cm in height 用于空调,制冷或加热系统的恒温器,用于墙壁安装,每个不超过15厘米长,11厘米宽,3厘米高
9032.89.6040 Water level and temperature control devices of a kind used in household appliances 用于家用电器的水位和温度控制装置
9032.89.6060 Flow and liquid level control instruments, each valued not over $10 流量和液位控制仪器,每个价值不超过10美元
9032.89.6085 Printed circuit board assemblies designed to control the flow of paint in paint sprayers 印刷电路板组件设计用于控制喷漆器中的涂料流动


此次两个批次排除清单共涉及221个税号下320项产品9月20日起恢复加征25%关税。

请相关企业仔细核对清单中的税号和商品描述。


深圳市升宝国际货运代理有限公司密切关注中美贸易战最新战况,如有消息,第一时间与各位货代分享!更多贸易资讯请关注升宝第三国转口贸易!升宝每天为您持续分享国内外最新货代外贸资讯!十多年专注于第三国转口贸易、门到门空运,空运出口,海运出口等,咨询热线:0769-2868-3803!

返回顶部